Administrator Guide

Option Description
Rear port Bottom Right Select this option to enable the bottom right USB port on the back
of the thin client.
Table 153. Conguring security settings
Option Description
Enable Admin Setup Lockout Select this option to prevent others from entering the setup when
an administrator password is set.
Table 154. Conguring power management settings
Option Description
Wake On LAN From the drop-down list, select any option to allow the thin client to
power up from the OFF state. You can trigger a thin client to power
up from the OFF state by using a LAN signal.
AC Recovery From the drop-down list, select any option to specify how the
system operates when the AC power is restored.
Table 155. Conguring wireless settings
Option Description
WLAN/WiGig Select this check box to enable the internal wireless devices.
Bluetooth Select this check box to enable Bluetooth devices.
Table 156. Conguring auto-on settings
Option Description
Auto On Time From the drop-down list, set the time of the day you want the
system to turn on automatically.
Table 157. Reboot schedule settings
Option Description
Reboot Option Some BIOS settings require the system to restart. From the drop-
down list, select one of the following options:
• Reboot immediately—The system restarts immediately.
• Reboot later—Select the Reboot Hour and Reboot Minute to
set the system restart time.
• Do not reboot—The system does not restarts.
Conguring BIOS settings for Wyse 5470 All-in-One thin client
with Windows 10 IoT Enterprise
Use the BIOS settings page to congure the BIOS settings for Wyse 5470 All-in-One thin client with Windows 10 IoT Enterprise.
Managing groups and
congurations 89