Administrator Guide

Table 139. Conguring reboot schedule
Option Description
Reboot Option Some BIOS settings requires the system to restart. From the drop-
down list, select one of the following options:
• Reboot immediately—The system restarts immediately.
• Reboot later—Select the Reboot Hour and Reboot Minute to
set the system restart time.
• Do not reboot—The system does not restarts.
Table 140. USB conguration
Option Description
Enable Front USB Ports Select this check box to enable the device attached to this port. If
you select this check box, the device is made available to the
operating system also. However, if the USB port is disabled, the
operating system cannot detect any device attached to this port.
Enable Rear USB Ports Select this check box to enable the device attached to this port. If
you select this check box, the device is made available to the
operating system also. However, if the USB port is disabled, the
operating system cannot detect any device attached to this port.
Table 141. Conguring power management settings
Option Description
Wake on AC From the drop-down list, select an option to specify how the
system must behave when AC power is restored after an AC power
loss. The available options are:
• O
• Last
• On
Wake On LAN From the drop-down list, select an option to allow the thin client to
power up from the o state. You can trigger a thin client to power
up from the o state by using a LAN signal or a wireless LAN signal.
Conguring device information
Use the Device Info page to set the device details.
Table 142.
Conguring device information
Option Description
Location Enter the device location.
Contact Enter the device contact.
Custom 1 to 3 Enter the custom values.
84 Managing groups and congurations