Administrator Guide

Option Description
• Others
Enable Whitelist or Disable Blacklist Use this option to enable whitelist or disable blacklist. By default,
Do not enable whitelist or blacklist is selected.
NOTE: The device restarts when you enable this option.
The following options are displayed when you select Enable
whitelist or Enable blacklist:
• Class
• USB Class
• Vendor ID
Table 58. Conguring advanced settings
Option Description
Reconnect After Disconnect Select this option to reconnect the connection automatically after
the connection is disconnected.
Multi-Monitor Select this option to enable the multi-monitor support. The height
and width of the session desktop is similar to the local virtual
desktop size.
Turn Compression o Select this option to compress the le size and to reduce the time
required to download the les.
Optimize for low link speed Select the check box to optimize session settings for low link
speed.
Full Screen Mode Select this option to set the connection window in the full screen
mode.
Fast Disconnect Key Select this option to use the fast disconnect key.
NOTE: To disconnect from the sessions, press the F12
key.
Conguring USB redirection settings
Universal Serial Bus (USB) redirection is a technology that enables you to plug an external device into a USB port on the endpoint and
access the device from within a remote desktop or application. You can congure the USB to redirect automatically to a particular device.
Use the USB redirection settings page to force redirect the USB connected devices to the remote session for ThinOS 8.5 and later
version devices.
Table 59. USB redirection settings
Option Description
Force Redirect Enter the force redirect device ID.
Force Local Enter the force local device ID.
Redirect Type From the drop-down list, select the redirection type.
NOTE: If PCoIP or Blast connection type is selected, then
do not select any value.
Managing groups and congurations 49