Manualshelf

Administrator Guide

ManualsBrandsDell ManualsConverged InfrastructureWyse Management Suite
31323334353637383940
Table Of Contents
Option Description
• Low—All settings are enabled on the local client.
Show Display Settings (8.5+) Select this option to congure the display settings. From the drop-
down menu, select a group to set the conguration access.
Enable Keyboard and Mouse Settings (8.5+) Select this option to congure the keyboard and mouse settings.
Disable Date and Time Settings (8.5+) Select this option to congure the date and time settings.
Network location to upload (8.5+) Enter the location to upload the network trace, network capture,
and log les.
Table 23. Conguring administrator mode
Option Description
Enable Admin mode Select the check box to enable the admin mode. When privilege
level is low or none, you can access the admin mode by entering
the user name and password.
Encrypted Credentials (8.5+) Select the check box to encrypt the credentials.
Show Admin Mode button (8.5+) Select the check box to display the admin mode option on the sign
on window.
Table 24. Conguring general settings
Option Description
Enable the Gkey reset Select this option to reset the factory settings of the device. While
restarting the system, press the G key to reset the factory settings.
Enable Trace Select this option to trace the les. This parameter enables the ICA
or RDP trace mode and the trace le is created in the directory.
Remove Certicate (8.5+) Select this option to remove the certicate.
Delete Certicate (8.5+) Select this option to delete the certicate. Enter the certicate
name which you want to delete.
Auto-install Certicates Select this option to install the certicate automatically.
Disable ThinPrint Service Select this option to disable the ThinPrint service.
Encrypt local Flash Select this option to congure the local settings, and set the user
credentials. Select this check box if you want to encrypt local ash.
Disable VNC Shadowing Select this option to disable the VNC shadowing.
Fast Disconnect Key Select this option to use the fast disconnect key.
NOTE: To disconnect from the Citrix sessions, press the
F12 key.
Managing groups and congurations 33