Manualshelf

Administrator Guide

ManualsBrandsDell ManualsConverged InfrastructureWyse Management Suite
171172173174175176177178179180
Table Of Contents
Wyse Management Suite extracts the les from the zipped folder and uploads the les in the <Repository Location>\repository
\osImages\valid location. The image extraction may take several minutes depending upon the image size.
NOTE: For ThinLinux operating system, download the merlin image, for example, 1.0.7_3030LT_merlin.exe, and copy in
the <Repository Location>\Repository\osImages\zipped folder.
The image is added to the repository.
2 Go to Apps and data > OS image repository > WES/ThinLinux to view the registered image.
Adding ThinOS rmware to repository
To add a operating system image to the ThinOS rmware repository, do the following:
1 In the Apps & Data tab, under OS Image Repository, click ThinOS.
2 Click Add Firmware le.
The Add File screen is displayed.
3 To select a le, click Browse and navigate to the location where your le is located.
4 Enter the description for your le.
5 Select the check box if you want to override an existing le.
6 Click Upload.
NOTE: The le is added to the repository when you select the check box but it is not assigned to any of the groups or
devices. To deploy a rmware to a device or a group of devices, go to the respective device or group conguration page.
Adding ThinOS package le to repository
To add a package le to the ThinOS repository, do the following:
1 In the Apps & Data tab, under OS Image Repository, click ThinOS.
2 Click Add Package le.
The Add File screen is displayed.
3 To select a le, click Browse and navigate to the location where your le is located.
4 Enter the description for your le.
5 Click Upload.
NOTE
:
• If the application already exists in the public repository, the application reference is added to the inventory. Else, the
application is uploaded to the public repository and the reference is added to the inventory.
• ThinOS rmware and BIOS packages uploaded by the operator cannot be deleted by tenant administrators.
Adding ThinOS BIOS le to repository
To add a BIOS le to the ThinOS repository, do the following:
1 In the Apps & Data tab, under OS Image Repository, click ThinOS.
2 Click Add BIOS le.
The Add File screen is displayed.
3 To select a le, click Browse and navigate to the location where your le is located.
4 Enter the description for your le.
5 Select the check box if you want to override an existing le.
6 Select the platform from the BIOS platform type drop-down list.
Apps and data
175