Administrator Guide

Figure 6. Remote Shadow(VNC)
The IP address and the port number of the target thin client is displayed in the Remote Shadow (VNC) dialog box.
NOTE: The default port number is 5900.
3 Change the port number of the target thin client.(optional)
4 Click Connect to initiate a remote session to the target thin client.
Shutting down devices
Wyse Management Suite enables you to shut down the devices such as, Windows Embedded Standard, ThinLinux, and ThinOS thin clients.
1 Click Devices.
The Device page is displayed.
2 Apply the lters to locate the preferred device. For more information, see Searching a device by using lters.
The preferred device list is displayed.
3 From the More Options drop-down list, click Shutdown Now.
The remote command to shut down the device is sent to the selected device. The device responds to the server and the command is
applied successfully.
NOTE
: The Shutdown Now option is not enabled for thin clients running on Linux operating system.
Tagging devices
Wyse Management Suite enables you to identify a device or group of devices by using the Tag Device option.
1 Click Devices.
The Device page is displayed.
2 Apply the lters to locate the preferred device. For more information, see Searching a device by using lter.
The preferred device list is displayed.
3 Select one or more devices. From the More Options drop-down list, click Tag Device.
The Set Device Tag window is displayed.
4 Enter the preferred tag name.
5 Click Set Tag.
Managing devices
163