Administrator Guide

NOTE:
• Force unregister option can be used to remove the device when there is no communication between the server and
client. The device will be moved to unmanaged state and can be removed from the server entry.
• Unregister and Force unregister actions can be performed by WES WDA UI also.
Resetting to factory default settings
To reset your ThinOS-based devices to factory default settings, do the following:
1 Click Devices.
The Device page is displayed.
2 Apply the lters to nd the preferred device.
3 Select the check box of the device.
4 From the More Actions drop-down menu, click Factory Reset.
An Alert window is displayed.
5 Enter the reason for the client reset.
6 Click Send Command.
Changing a group assignment
To change a group assignment, do the following:
1 Click Devices.
The Device page is displayed.
2 Apply the lters to nd the preferred device.
3 Select the check box of the device.
4 From the More Actions drop-down menu, click Change Group.
The Change Group Assignment window is displayed.
5 From the drop-down menu, select a new group for the device
6 Click Save.
Sending messages to devices
To send messages to devices, do the following:
1 Click Devices.
The Devices page is displayed.
2 Apply the lters to nd the preferred device.
3 Select the check box of the device.
4 From the More Actions drop-down menu, click Send Message.
The Send Message window is displayed.
5 Enter the message.
6 Click Send.
Activating the devices
If a device is turned o or in the sleep mode, and you want to activate the device, then do the following:
1 Click Devices.
The Device page is displayed.
2 Apply the lters to nd the preferred device.
3 Select the check box of the device.
Managing devices
159