Administrator Guide

Table 217. Congure BIOS Admin password settings
Option Description
Enable Admin Password Select this check box to enable the BIOS administrator password.
Successful changes to this password take eect immediately.
Admin Password Enter the new BIOS administrator password. This option is available
only if you select the Enable Admin Password check box.
Table 218. Congure power management settings
Option Description
USB Wake Support Select the check box to allow the thin client to power up from the
o state.
Wake On LAN From the drop-down list, select an option to allow the thin client to
power up from the o state. You can trigger a thin client to power
up from the o state by using a LAN signal or a wireless LAN signal.
AC Recovery From the drop-down list, select an option to specify how the
system must behave when the AC power is restored.
Table 219. Congure auto-on settings
Option Description
Auto On From the drop-down list, set the time of day you want the system
to turn on automatically.
Table 220. Congure post behavior settings
Option Description
Numlock LED Select the check box to turn on the NumLock LED light when the
systems restarts.
Keyboard Errors Select the check box to display the keyboard related errors when
the systems restarts.
Fastboot From the drop-down list, select an option to increase speed of the
restart process.
Extend BIOS POST Time From the drop-down list, select a delay time to see the post status
messages.
Table 221. Congure reboot schedule
Option Description
Reboot Option Some BIOS settings requires the system to restart. From the drop-
down list, select one of the following options:
• Reboot immediately—The system restarts immediately.
• Reboot later—Select the Reboot Hour and Reboot Minute to
set the system restart time.
• Do not reboot—The system does not restarts.
Managing groups and congurations 121