Administrator Guide

Table 207. Conguring remote connection settings—RDP
Option Description
Connection Name Select this option to enter the name to identify the connection.
Auto Launch Connection on Logon Select this option to automatically launch the connection after you
log in.
Server Address Enter the server name or the IP address.
SmartCard Login Select this option to enable the smart card authentication.
Use Network Level Authentication (NLA) Select this option to enable the Network Level authentication.
Username Enter the user name.
Password Enter the password.
Domain Name Enter the domain name.
Window Size Select this option to set a window size. From the drop-down menu,
select any one of the following options:
• Default
• 640 x 480
• 1024 x 768
• 800 x 600
• 1280 x 1024
• 1600 x 1200
• Full Screen
Forward All Printers Select this option to forward all the printers to the remote
connection.
Auto Reconnect Select this option to enable the thin client to reconnect to the RDP
session automatically.
Delay before trying to reconnect
Enter the time in seconds to delay the reconnection attempt. When
you select the Auto Reconnect check box, this option is displayed.
Map all drives to a single share name—WyseUSB
Select this option to map all the devices to a single shared name—
WyseUSB.
Screen Color Depth From the drop-down list, select the screen color depth.
Enable H.264 Decoding Support Select this option to enable H.264 decoding support for Remote
Desktop Connections.
Enable UDP Networking Select this option to enable UDP protocol as preferred transport for
data transmission.
Ping Before Connect Select this option to enable ping. For non-published application
connections, a ping (ICMP) is sent to the host server prior to
connecting to verify that the host is reachable.
NOTE: This option is supported on thin clients running
ThinLinux 2.1 and later versions.
Notify when disconnected Select this option to notify the disconnection.
Managing groups and congurations 117