Deployment Guide

The minimum hardware requirement on a single server for 1,20,000 devices is:

Table 3. Hardware specication

Application detail Hardware specication

Wyse Management Suite 1.1 16 CPUs, 32 GB RAM, 200 GB HDD

Figure 3. Single server deployment — 1,20,000 devices

FE MQTT Servers separated from the Wyse

Management Server

This section explains about the architecture of FE MQTT Servers separated from the Wyse Management Suite server. This approach

reduces the overhead on the Wyse Management Suite server in handling the number of TCP connections that needs to be supported.

Each of the FE MQTT servers may be deployed on a separate server or on a single server.

The minimum hardware requirements are:

Table 4. Hardware requirements

Application detail Hardware specication

Wyse Management Suite 1.1 8 CPUs, 16 GB RAM, 200 GB HDD, 1 network interface

Each FE MQTT server deployed on separate servers. 4 CPUs, 8 GB RAM, 40 GB HDD, 1 network interface

FE MQTT Server deployed on a single server. 8 CPUs, 16 GB RAM, 80 GB HDD, 1 network interface

The following diagram depicts the architecture of FE MQTT Servers separated from the Wyse Management Suite server.

Figure 4. FE MQTT Servers separated from the Wyse Management Suite server

Deployment architecture