Administrator Guide

NOTE: The system reboots three times during the package deployment process.

Deploy INI parameter to ThinOS devices

Ensure that your devices are running ThinOS version 8.4 or later. To deploy an INI parameter to the ThinOS-based devices:

1 Create a wnos.ini le with the following INI parameters:

Table 5. INI parameters

ThinOS v8.5-based devices ThinOS v8.4-based devices

AutoLoad=1

SignOn=1

WDAService=yes\

Priority=WMS

WMSEnable=yes\

Server=<Server URL>\

CAValidation=no\

Override=yes

AutoLoad=1

SignOn=1

WDAService=yes\

Priority=CCM

CCMEnable=yes\

CCMServer=<Server URL>\

GroupPrefix=<Prefix>\

GroupKey=<Key>\

MQTTServer=<Server URL>\

CAValidation=no\

Override=yes

NOTE: For ThinOS Lite devices, you must create a xen.ini le with the same INI parameters that are listed in the table.

2 Place the wnos.ini le in the C:\inetpub\ftproot\Rapport\WTOSCONFIG\WNOS folder of the Wyse Device Manager (WDM) server.

NOTE

: The group token information is not needed for ThinOS v8.5-based devices. The device registers to the default policy

group, and the group token is automatically updated in the Wyse Device Agent user interface.

3 Log in to WDM Web UI, and on the Wyse ThinOS page, enable the WTOS INI path upon checkin option.

NOTE

: If you are using WDM Microsoft management console (MMC), navigate to Conguration Manager and enable this

option.

4 Restart the device using WDM.

Switch ThreadX 5.x devices from WDM to Wyse

Management Suite

Before you migrate ThreadX 5.x devices, ensure that you have upgraded the EM SDK package to the latest version. For more information,

see prerequisites for Teradici-based device migration. To switch ThreadX 5.x devices from WDM to Wyse Management Suite, do the

following:

1 Log in to Wyse Management Suite.

2 Go to Portal Administration, and click Teradici in the Console Settings section.

3 Select the check box that corresponds to the Teradici server, and click Enable Server.

4 Click Sync Devices.

The devices that are registered to the EM SDK server get registered to the Wyse Management Suite server.

Switching devices from Wyse Device Manager to Wyse Management Suite