Administrator Guide

Table 134. Conguring security settings
Option Description
Admin Setup Lockout Select this check box to prevent users from entering Setup when
the admin password is set.
Table 135. Admin password settings
Option Description
Enable Admin Password Select this check box to enable the BIOS administrator password.
Successful changes to this password take eect immediately.
Admin Password Enter the new BIOS admin password. This option is available only if
you select the Enable Admin Password check box.
Table 136. Conguring power management settings
Option Description
Wake On LAN Enable this option to power on the device from the Wyse
Management Suite console. To perform this action, run the Wake
On LAN (WOL) command on the Devices page.
Wake on AC Enable this option to automatically boot the device after power is
restored—following a power failure.
Table 137. Conguring auto-on settings
Option Description
Auto On From the drop-down list, set the time of the day you want the
system to turn on automatically.
Table 138. Conguring reboot schedule
Option Description
Reboot Option Some BIOS settings requires the system to restart. From the drop-
down list, select one of the following options:
Reboot immediatelyThe system restarts immediately.
Reboot later—Select the Reboot Hour and Reboot Minute to
set the system restart time.
Do not rebootThe system does not restarts.
Conguring Wyse 7040 thin client BIOS settings
Use this page to congure the BIOS settings of Wyse 7040 thin clients.
Table 139. System
conguration
Option Description
Sound Device Select this check box to enable the sound device.
Microphone Select this check box to enable the microphone.
Managing groups and congurations 81