Administrator Guide
Table 56. USB redirection settings
Option Description
Force Redirect Enter the force redirect device ID.
Force Local Enter the force local device ID.
Redirect Type From the drop-down list, select the redirection type.
NOTE: If PCoIP or Blast connection type is selected, then
do not select any value.
Interface Redirect Select this option to enable the interface redirection option.
Conguring third party authentication settings
Use Third party authentication settings page to congure Single Sign-On (SSO) authentication settings for ThinOS 8.5 and later version
devices.
Table 57. Conguring authentication settings
Option Description
Authentication Mode Select this option to specify the authentication mode. From the
drop-down menu, select any one of the following options:
• Imprivata
• Caradiam
• SecureMatrix
• HealthCast
Table 58. Conguring RF-ID settings
Option Description
Rf-Id Disable Beep Select this option to disable RFID beep. Radio-
Frequency Identication—RFID is the use of radio waves to read
and capture information stored on a tag attached to an object. A
tag can be read from up to several feet away and does not need to
be within direct line-of-sight of the reader. RFID authentication
provides a quick access to a system to perform short tasks, you
can use fast user identication through radio-frequency
identication (RFID).
Disable Keystroke Select this option to disable keystroke functionality. A keystroke is a
single press of a key on a keyboard. Each key press is a keystroke.
The keyboard is used as an input port for sending signals.
Set Card Type Select this option to set the card type. RFID cards contain an
integrated circuit and an antenna, which are used to transmit data
to the RFID reader which is also known as an interrogator.
Disable Initialization Select this option to disable the RFID authentication.
Disable LED Select this option to disable the LED.
Managing groups and congurations 47