Administrator Guide

6 Enter the PCoIP Endpoint in the ASCII column as the Vendor ID.
7 Click OK to save the settings.
Conguring DHCP options
1 Right-click the IPv4 option, and the select Set Predened Options.
2 Select PCoIP Endpoint as the Option class, and then click Add.
3 In the Option Type dialog box, enter the name as EBM URI, data type as String, code as 10, and description as Endpoint Bootstrap
Manager URI, and then click OK.
4 Click OK to save the settings.
5 Expand the DHCP scope to which you want to apply the options.
6 Right-click the Scope Options, and then select Congure Options.
7 Click the Advanced tab, and then select the PCoIP Endpoint vendor class.
8 Select the 010 EBM URI check box, and then enter a valid Management Console URI in the String eld. Click Apply. This URl
requires a secured WebSocket prex, for example, wss://<MC IP address>:[port number]. 5172 is the MC's listening port . Entering
this port number is an optional step.
9 Click OK to save the settings.
10 Select PCoIP Endpoint as the Option class, and then click Add.
11 In the Option Type dialog, enter the name as EBM X.509 SHA-256 ngerprint, data type as String, code as 11, and the description
as EBM X.509 SHA-256 ngerprint, and then click OK.
12 Expand the DHCP scope to which you want to apply the options.
13 Right-click the Scope Options, and then select Congure Options.
14 Click the Advanced tab, and then select the PCoIP Endpoint vendor class.
15 Select the 011 EBM X.509 SHA-256 ngerprint check box, and paste the SHA-256 ngerprint.
16 Click OK to save the settings.
17 Go to the client web browser.
18 Go to Conguration > Management, and set the manager discovery mode to Automatic
19 The client is connected to the server which is mentioned in the DHCP server.
Creating the DNS SRV record
1 Log in to the DNS server.
2 Right-click the DNS server in the SERVERS pane, and the select DNS Manager from the context menu.
3 In Forward Lookup Zones, right-click the domain, and then select Other New Records from the context menu.
4 In the Resource Record Type dialog box, select Service Location (SRV) from the list, and click Create Record.
5 Set Service to _pcoip-bootstrap, protocol to _tcp, and Port number to 5172, which is MC's default listening port. For Host oering
this service, enter the MC's FQDN.
NOTE
: The MC's FQDN must be entered because the DNS specication does not allow an IP address in the SRV
records.
6 Click OK.
Teradici device management
199