Administrator Guide

Teradici device management

The Teradici device management section provides the information about managing and discovering the teradici divices. The teradici

management console uses SDK’s to support management, conguration for tera devices. This is applicable only for Wyse Management

Suite private cloud with pro license type. For more information on Teradici conguration policies, see Editing Teradici policy settings.

Topics:

• Discovering Teradici devices

• CIFS use case scenarios

Discovering Teradici devices

Prerequisites

• Install the latest version of Wyse Management Suite on Microsoft Windows 2012 Server or later versions. Threadx 5.x and 6.x devices

works with the latest version of the operating system.

• Install and enable the EMSDK component.

• The FQDN of the Wyse Management Suite server must be available for DHCP or DNS congurations.

• Cert.pem must be placed in the default path C:\Program Files\Dell\WMS\Teradici\EMSDK. It is used to discover Threadx devices.

Manual discovery from the client

1 Go to, https://<clientIP>.

2 Accept the certicate warning message.

3 Enter the administrator password (default password is Administrator) and login.

4 Go to, upload > certicate. Select the Cert.pemle from the default path and click Upload.

5 Go to Conguration > Management. Click the clear management state button to register the device to the new Management

Server.

6 Set the manager discovery mode to manual

7 Enter the Endpoint Bootstrap Manager URL in the following format wss://<IP Address of the WMS server>

NOTE

: If EMSDK is installed with custom port then provide Endpoint Bootstrap Manager URL in the following format

wss://<IP Address:Custom port.

8 Click Apply, and then click Continue.

9 The management status is displayed as Connected to the Endpoint server.

Adding the PCoIP endpoint vendor class to DHCP server

1 Log in to your DHCP server.

2 Right-click the DHCP server in the SERVERS pane, and select DHCP Manager.

3 Right-click the IPv4 option, and then select Dene Vendor Classes.

4 Click Add to add a new DHCP vendor class.

5 Enter the PCoIP Endpoint in the Display name eld.

198 Teradici device management