Administrator Guide

Table 217. Congure security settings
Option Description
Enable UEFI Capsule Firmware Update Select the check box to update the BIOS through UEFI capsule
rmware update.
Enable admin Setup Lockout Select this check box to prevent others from entering the setup
when an administrator password is set.
Table 218. Congure power management settings
Option Description
Wake On LAN From the drop-down list, select an option to allow the thin client to
power up from the OFF state. You can direct the thin client to
power up from the OFF state by using a LAN signal.
AC Recovery From the drop-down list, select an option to specify how the
system should operate when the AC power is restored.
USB Wake Support Select the check box to allow the thin client to power up from the
OFF state.
Table 219. Congure post behavior settings
Option Description
Enable Numlock LED Select the check box to turn on the NumLock LED light when the
system restarts.
Enable Keyboard Errors Detection Select the check box to enable the system to display keyboard
related errors at restart.
Fastboot From the drop-down list, select an option to increase the speed of
the restart process.
Extend BIOS POST Time From the drop-down list, select a delay time to see the post status
messages.
Table 220. Congure wireless settings
Option Description
WLAN/WiGig Select this check box to enable the internal wireless devices.
Bluetooth Select this check box to enable Bluetooth devices.
Table 221. Congure BIOS administrator password
Option Description
Enable administrator Password Select this check box to enable the BIOS administrator password. If
you change this password, the changes are applied immediately.
administrator Password Enter the new BIOS administrator password. This option is available
only if you select the Enable administrator Password check box.
Managing groups and congurations 117