Administrator Guide

Table 211. Congure auto-on settings
Option Description
Auto On From the drop-down list, set the time of day you want the system
to turn on automatically.
Table 212. Congure post behavior settings
Option Description
Numlock LED Select the check box to turn on the NumLock LED light when the
systems restarts.
Keyboard Errors Select the check box to display the keyboard related errors when
the systems restarts.
Fastboot From the drop-down list, select an option to increase speed of the
restart process.
Extend BIOS POST Time From the drop-down list, select a delay time to see the post status
messages.
Table 213. Congure reboot schedule
Option Description
Reboot Option Some BIOS settings requires the system to restart. From the drop-
down list, select one of the following options:
• Reboot immediately—The system restarts immediately.
• Reboot later—Select the Reboot Hour and Reboot Minute to
set the system restart time.
• Do not reboot—The system does not restarts.
Conguring BIOS settings for Wyse 5070 thin client with
ThinLinux
Use the BIOS settings page to congure the BIOS settings for Wyse 5070 thin client with ThinLinux.
Table 214.
Congure general settings
Option Description
Device Notes Enter the device notes in the provided eld. For example, property
ownership tag.
Table 215. Congure system settings
Option Description
Enable Audio Select this check box to enable the audio device.
Enable UEFI Network Stack Select this check box to enable UEFI Network Stack. For the
enabled NICs, the networking protocols are installed, and the pre-
OS and early OS networking features are available.
Integrated NIC From the drop-down list, select the preferred option. This option
controls the on-board LAN controller.
Managing groups and congurations 115