Administrator Guide

Table 206. Congure USB settings
Option Description
Enable USB Boot Support Select this check box to enable the USB boot setup. Allows you to
boot any type of USB Mass Storage Devices.
Enable Front USB Ports Select this check box to enable the device attached to this port. If
you select this check box, the device is made available to the
operating system also. However, if the USB port is disabled, the
operating system cannot detect any device attached to this port.
NOTE: The USB keyboard and the mouse always work in
the BIOS setup irrespective of this setting.
Enable Rear-Left Dual USB 2.0 Ports Select this check box to enable the device attached to this port. If
you select this check box, the device is made available to the
operating system also. However, if the USB port is disabled, the
operating system cannot detect any device attached to this port.
NOTE: The USB keyboard and the mouse always work in
the BIOS setup irrespective of this setting.
Table 207. Congure wireless settings
Option Description
Wireless Device Enable Select the check box to enable internal wireless devices.
Table 208. Congure security settings
Option Description
UEFI Capsule Firmware Update Select the check box to update the BIOS through UEFI capsule
rmware update.
Table 209. Congure BIOS Admin password settings
Option Description
Enable Admin Password Select this check box to enable the BIOS administrator password.
Successful changes to this password take eect immediately.
Admin Password Enter the new BIOS administrator password. This option is available
only if you select the Enable Admin Password check box.
Table 210. Congure power management settings
Option Description
USB Wake Support Select the check box to allow the thin client to power up from the
o state.
Wake On LAN From the drop-down list, select an option to allow the thin client to
power up from the o state. You can trigger a thin client to power
up from the o state by using a LAN signal or a wireless LAN signal.
AC Recovery From the drop-down list, select an option to specify how the
system must behave when the AC power is restored.
114 Managing groups and congurations