Release Notes

• Windows Embedded Standard Wyse Device Agent 14.3.0.66

Teradici device management

• Supports Teradici management console by using EMSDKs to manage the Teradici devices.

• Supports the following Teradici devices:

• Wyse 5030 PCoIP zero client

• Wyse 7030 PCoIP zero client

• Wyse 5050 AIO

• Supports the firmware upgrade and downgrade process from Threadx 5.x to Threadx 6.x version.

• Supports up to 5000 Teradici devices with each EMSDK server.

• Supports DNS and DHCP configuration to connect to SDK in Teradici devices. All tenants must have their own Teradici EMSDK

running in their environment.

• Supports Teradici management for private cloud with pro license.

• Supports Teradici firmware versions 5.x and 6.x.

• Supports up to 60,000 Teradici devices.

Dell Wyse Management Suite installer updates with Teradici

components

The Dell Wyse Management Suite installer provides the following options:

• You can install the Teradici EMSDK components as a service either on Wyse Management Suite server or on a different server.

• You can create the CIFS user credentials while installing the software.

• You can upgrade Wyse Management Suite version 1.1, 1.2, and 1.2 HF1 to Wyse Management Suite version 1.3. If the upgrade process

to Wyse Management Suite version 1.3 fails, the installer rolls back to the previous state.

The following table provides the Dell Wyse Management Suite upgrade path:

Table 1. Supported upgrade path

Dell Wyse Management Suite upgrade version Path

Upgrading from Dell Wyse Management Suite version 1.1 to Dell

Wyse Management Suite version 1.3

1.1 > 1.3

1.1 > 1.2 > 1.2 HF1 > 1.3

1.1 > 1.2 HF1 > 1.3

1.1 > 1.2 > 1.3

Upgrading from Dell Wyse Management Suite version 1.2 to Dell

Wyse Management Suite version 1.3

1.2 > 1.3

1.2 > 1.2 HF1 > 1.3

Upgrading from Dell Wyse Management Suite version 1.2 HF1 to

Dell Wyse Management Suite version 1.3

1.2 HF1 > 1.3

Wyse Easy setup configurations

Wyse Management Suite with pro license supports all the existing Wyse Easy setup configurations for Wyse software thin clients. Wyse

convertor for PCs version 2.0 and later versions are required to support all the Wyse Easy Management configurations.

Enhanced ThinOS configurations

In Wyse Management Suite version 1.3, new set of ThinOS policy settings are added. To configure the policy settings, follow the

navigation path:

Dell Wyse Management Suite 1.3 Release Notes