Administrator Guide

Configure remote shadow connection for Dell Hybrid
Client devices
Use this page to enable global and group administrators to access the Dell Hybrid Client devices sessions remotely. This feature
is applicable to only to private cloud and is available for both Standard and Pro licenses.
Steps
1. Deploy the VNC add-on package from Wyse Management Suite using Standard or advanced application policy—see
Application Policy.
The add-on is installed and the device reboots.
2. Configure and deploy the VNC server options from Wyse Management Suite. To configure the VNC Server options, do the
following:
a. Go to the Groups & Configs page, and select a group.
b. From the Edit Policies drop-down menu, click Hybrid Client.
The Configuration Control | Hybrid Client window is displayed.
c. Click the Standard or Advanced option.
d. Go to Privacy & Security > VNC Server and configure the options.
e. Click Save & Publish.
Shutting down devices
Wyse Management Suite enables you to shut down the devices such as Windows Embedded Standard, ThinLinux, and ThinOS
thin clients.
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to locate the preferred device.
The preferred device list is displayed.
3. From the More Options drop-down list, click Shutdown Now.
The remote command to shut down the device is sent to the selected device. The device responds to the server, and the
command is applied successfully.
NOTE: The Shutdown Now option is not enabled for thin clients running on Linux operating system.
Tag a device
Wyse Management Suite enables you to identify a device or group of devices by using the Tag Device option.
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to locate the preferred device.
The preferred device list is displayed.
3. Select one or more devices. From the More Options drop-down list, click Tag Device.
The Set Device Tag window is displayed.
4. Enter the preferred tag name.
5. Click Set Tag.
Managing devices
67