Administrator Guide

Send messages to a device
You can send a message to a registered device using the Devices page.
Steps
1. Click Devices.
The Devices page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. From the More Actions drop-down menu, click Send Message.
The Send Message window is displayed.
5. Enter the message.
6. Click Send.
Wake On LAN command
You can send a command to activate a device if it is turned off or in the Sleep mode.
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. From the More Actions drop-down menu, click Wake On LAN.
An Alert window is displayed.
5. Click Send Command.
View the device details
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
The preferred device list is displayed.
3. Click any of the displayed devices.
The Device Details page is displayed.
View the display parameters
From Wyse Management Suite 3.1, you can view the display setup of the devices running a Windows Embedded and ThinLinux
operating system. You can view the vendor name, model number, serial number, resolution, aspect ratio, mode, alignment, and
rotation details of the display setup.
Steps
1. Go to the Devices page.
2. Apply the filters to find the preferred device.
The preferred device list is displayed.
3. Click any of the displayed devices.
The Device Details page is displayed.
Managing devices
63