Administrator Guide

5. Select the Enable WMS Advanced Settings option, and enter the WMS server or MQTT server details.

6. Enable or disable CA validation based on your license type. For public cloud, select the Enable CA Validation check box, and

for private cloud, select the Enable CA Validation check box if you have imported certificates from a well-known certificate

authority into your Wyse Management Suite server.

To enable the CA validation option in the private cloud, you must install the same self-signed certificate on the ThinOS

device as well. If you have not installed the self-signed certificate in the ThinOS device, then, do not select the Enable CA

Validation check box. You can install the certificate to the device by using Wyse Management Suite after registration, and

then enable the CA validation option.

NOTE:

● A warning message is displayed if you disable CA validation. You must click Ok to confirm.

● For the public cloud version of Wyse Management Suite in USA data-center, do not change the default WMS server

and MQTT server details. For the public cloud version of Wyse Management Suite in Europe data-center, use the

following:

○ CCM Server—eu1.wysemanagementsuite.com

○ MQTT Server—eu1-pns.wysemanagementsuite.com:1883

● A warning message is displayed if the server address contains http. You must click Ok to confirm.

7. To verify the setup, click Validate Key. The device automatically restarts after the key is validated.

NOTE: If the key is not validated, verify the group key and WMS server URL which you have provided. Ensure that

ports 443 and 1883 are not blocked by the network.

8. Click OK.

The device is registered to Wyse Management Suite.

Registering Windows Embedded Standard Thin Clients to Wyse

Management Suite by using Wyse Device Agent

Prerequisites

Create a group in Wyse Management Suite to register a device.

Steps

1. Open the Wyse Device Agent application.

The Wyse Device Agent screen is displayed.

2. From the Management Server drop-down list, select Wyse Management Suite.

3. Enter the server address and the port number in the respective fields.

NOTE: If the server address contains http, a warning message is displayed. Click Ok to confirm.

4. Enter the group token. For a single tenant, the group token is an optional step.

NOTE: The group token that is entered in the Group Token field is not displayed in clear text.

5. Enable or disable CA validation that is based on your license type.

NOTE: If you disable CA validation, a warning message is displayed. Click Ok to confirm.