Administrator Guide

NOTE: File size should not be more than 1 MB.
3. Go to Groups & Configs and click Import Policies.
The Import Policies Wizard screen is displayed.
4. Select Bulk Device Exceptions.
5. Click Browse and select the password encrypted .zip file.
6. Click Next.
Select the device type configurations to import page is displayed.
7. Click Next.
NOTE: Since you can bulk import a device exception file for ThinOS 9.x devices, you cannot configure the options in the
page.
8. Enter the .zip file password that was used to zip the .json file.
9. Click Next.
A summary of the bulk device exceptions import is displayed.
10. Click Import.
After the configurations are imported, a report generation link is generated in the Group & Configs page which can be
downloaded. A success message is displayed in the Group & Configs page.
NOTE: If a device is not registered and the configurations are imported, exceptions are applied to this device only if the
device registers with one of the preloaded serial numbers device in the next 30 days.
NOTE: If a device is already registered and the configurations are imported with device serial number, then the device
exceptions are applied to the device.
NOTE: Imported file is a password protected. AES-256 and ZipCrypto encryption is supported.
NOTE: Configurations such as certificates, wallpaper, logo, and so on, with resources associated with them are not
imported.
Managing groups and configurations 49