Administrator Guide

● When no user has logged on to the device for a period of time—If you select this option, the configuration are
applied when no user has logged in to the device for defined time. You can specify the idle time after which the
configurations are applied to the device.
NOTE: You can also configure these settings for a particular device from the Devices page. For more information, see
Configure a device level policy.
Configure deployment settings for Dell Hybrid Client devices
From Wyse Management Suite 3.1, you can configure the deployment settings for Dell Hybrid Client devices. You can configure
the settings to silently deploy configurations to devices.
Steps
1. Go to the Groups & Configs page, and select a group.
2. From the Edit Policies drop-down menu, click Hybrid Client.
3. Go to WMS Settings > Deployment Setting.
4. Configure any the following options:
● Configure Update Notification—If you disable this option, the configuration update dialog box is not displayed on the
device.
● Application Update Notification—If you disable this option, the user notification is not displayed when you deploy an
application policy.
● Image Update Notification—If you disable this option, the user notification is not displayed when you deploy an image
policy.
● Logoff Notification—If you disable this option, the user notification is not displayed for a user to log off from the
device.
● Reboot Notification—If you disable this option, the user notification is not displayed when the device reboot
configuration is deployed.
● Display Lock-screen—If you disable this option, the lock screen is not displayed during application and image updates.
NOTE:
You can enable the Enable/Disable All Notifications option if you want to enable all the options and
notifications.
NOTE: Configure Update Notification and Display Lock-screen are disabled by default.
5. Click Save & Publish.
Create and import bulk device exception file
From Wyse Management Suite 3.1, you can deploy device exception configurations to multiple ThinOS 9.x devices.
Steps
1. Create a bulk device exception file. To create a file, do any of the following:
● Create a group policy for a test group and then export that policy to a file. If the configuration contains passwords, they
are replaced with * in the exported file. For example:
{
"WMSVersion": "4.6.8",
"exportedDate": "1581466633677",
"deviceTypes": [
{
"type": 6,
"configurations": {
"version": "0.0.1",
"sequence": 1581466506281,
"parameters": {
"AdminModeUsername": {
"value": "admin",
46
Managing groups and configurations