Administrator Guide

● Image Update Notification—If you disable this option, the user notification is not displayed when you deploy an image
policy.
● Logoff Notification—If you disable this option, the user notification is not displayed for a user to log off from the
device.
● Reboot Notification—If you disable this option, the user notification is not displayed when the device reboot
configuration is deployed.
● Display Lock-screen—If you disable this option, the lock screen is not displayed during application and image updates.
NOTE: All the options are enabled by default.
6. Click Save & Publish.
Edit the Wyse Software Thin Client policy settings
Steps
1. Click Groups & Configs.
The Groups & Configs page is displayed.
2. Click the Edit Policies drop-down menu.
3. Click Wyse Software Thin Client.
The Wyse Software Thin Client page is displayed.
4. After configuring the policy settings, click Save and Publish.
Edit the Cloud Connect policy settings
Steps
1. Click Groups & Configs.
The Groups & Configs page is displayed.
2. Click the Edit Policies drop-down menu.
3. Click Cloud Connect.
4. After configuring the policy settings, click Save and Publish.
Edit the Dell Hybrid Client policy settings
Prerequisites
● Create a group with a group token for the devices you want to push the application package.
● Register Dell Hybrid Client to Wyse Management Suite.
Steps
1. Go to the Groups & Configs page, and select a group.
2. From the Edit Policies drop-down menu, click Hybrid Client.
The Configuration Control | Hybrid Client window is displayed.
3. Click the Advanced option.
4. Select the options that you want to configure.
5. In the respective fields, click the setting and configure the options as required.
6. Click Save & Publish.
NOTE: After you click Save & Publish, the configured settings are also displayed in the Standard tab.
The following table lists the feature set that you can configure in the Configuration Control | Hybrid Client window.
Managing groups and configurations
43