Administrator Guide

Figure 5. Configuration Control | ThinOS
3. Click the Advanced or Standard option.
4. Select the options that you want to configure.
5. In the respective fields, click the option that you want to configure.
You can use the Global search option to find the relevant settings or parameters that are available in the Policy Settings. The
search result displays the settings in the following order:
● Setting
● Parameter Group
● Parameter sub group
● Parameter
6. Configure the options as required.
NOTE:
From Wyse Management Suite 3.2, you can click the Reset Policy option if you want to reset the policy to
default configurations. You can also click Reset Entire Policy option if you want to clear all configurations.
7. Click Save & Publish.
NOTE:
For information about the changes or updates to the ThinOS configurations, see ThinOS 9.x Administrator's
Guide and Release notes at www.dell.com/support.
NOTE: After you click Save & Publish, the configured settings are also displayed in the Standard tab.
NOTE: The policy configurations with reference file such as firmware, package, wallpaper and so on applied to the
parent group, for example Default Device group, are applied by default to the child groups. From Wyse Management
Suite 3.2, you can override these configurations and remove them from the child groups.
NOTE: You can only upload and deploy 10 certificates, wallpapers, and reference files from the Configuration Control
| ThinOS window.
42 Managing groups and configurations