Administrator Guide

Table 191. Configuring power management settings
Option Description
USB Wake Support Select the check box to allow the thin client to power up from
the off state.
Wake On LAN From the drop-down list, select an option to allow the thin
client to power up from the off state. You can trigger a thin
client to power up from the off state by using a LAN signal or
a wireless LAN signal.
AC Recovery From the drop-down list, select an option to specify how the
system must behave when the AC power is restored.
Table 192. Configuring auto-on settings
Option Description
Auto On From the drop-down list, set the time of day you want the
system to turn on automatically.
Table 193. Configuring post behavior settings
Option Description
Numlock LED Select the check box to turn on the NumLock LED light when
the systems restarts.
Keyboard Errors Select the check box to display the keyboard related errors
when the systems restarts.
Fastboot From the drop-down list, select an option to increase speed of
the restart process.
Extend BIOS POST Time From the drop-down list, select a delay time to see the post
status messages.
Table 194. Configuring reboot schedule
Option Description
Reboot Option Some BIOS settings requires the system to restart. From the
drop-down list, select one of the following options:
● Reboot immediately—The system restarts immediately.
● Reboot later—Select the Reboot Hour and Reboot
Minute to set the system restart time.
● Do not reboot—The system does not restarts.
Configuring Wyse Software thin client policy settings
To configure the policy settings for Wyse Software thin client devices, do the following:
1. Select a group, and click Edit Policies.
2. Click Wyse Software Thin Client.
3. After configuring the options, click Save and Publish.
94
Managing groups and configurations