Administrator Guide

The rule is displayed in the unmanaged group list. This rule is applied automatically and the device is listed in the destination
group.
Editing unmanaged device auto assignment rule
1. Click the Rules tab.
2. Select the Unmanaged Device Auto Assignment option.
3. Select the rule and click the Edit option.
4. Click Save.
Disabling and deleting rule
1. Click the Rules tab.
2. Select the Unmanaged Device Auto Assignment option.
3. Select a rule and click the Disable Rule option.
4. Click the Delete Disabled Rule(s) option.
Saving rule order
If multiple rules are present, then you can change the order of a rule to be applied on the devices.
1. Click the Rules tab.
2. Select the Unmanaged Device Auto Assignment option.
3. Select the rule which you want to move and then move it to the top order.
4. Click Save Rule Order.
Alert Notification
You can select Notification Target or disable the alert notification for the following:
● Group Admin
● Global Admin
● Global and Group Admin
NOTE:
The notification frequency can be configured for every 4 hours, every 12 hours, daily or weekly basis to the target
client.
Figure 22. Alert Notification
1. To add a rule, click the Add Rule option and enter the following details:
a. From the drop-down list, select Rule.
Managing rules
133