Administrator Guide

4. DHCP Inform—(Dynamic Discovery) Allows devices to use DHCP Inform to discover a WDM Server.
5. Enable Automatic Discovery After Missed Check-ins—Select the number of missed check-ins after which you want the
auto discovery options enabled.
6. Click OK to save the settings.
The Wyse Device Manager option can be disabled using the following INI parameters:
● WMSService=no
● Service=wdm disable=yes
● RapportDisable=yes
Registering Windows Embedded Standard thin clients through
Wyse Device Agent User Interface
About this task
NOTE: Creating a group is a pre-requisite for registering the thin client device to the Wyse Management Suite.
Steps
1. Open the Wyse Device Agent (WDA) application.
The Wyse Device Agent window is displayed.
2. Enter the device registration details.
3. From the Management Server drop-down list, select Wyse Management Suite.
4. Enter the server address and the port number in the respective fields.
5. Enter the group token. For a single tenant, the group token is an optional step.
6. Click Register.
After the registration is complete, the Registered to Wyse Management Suite message is displayed.
Registering Linux thin clients through Wyse Device Agent User
Interface
About this task
NOTE: Creating a group is a pre-requisite for registering the thin client to Wyse Management Suite.
Steps
1. Open the Wyse Device Agent (WDA) application.
The Wyse Device Agent window is displayed.
2. Enter the device registration details.
3. In the Wyse Management Suite tab, enter the Wyse Management Suite server address.
4. Enter the group token.
5. Click Register.
After the registration is complete, the Registered to Wyse Management Suite message is displayed.
Registering devices by using DHCP option tags
About this task
You can register the devices by using the following DHCP option tags:
NOTE:
For detailed instructions on how to add DHCP option tags on the Windows server, see Creating and configuring DHCP
option tags.
114 Managing devices