Manualshelf

Administrator Guide

ManualsBrandsDell ManualsConverged InfrastructureWyse Management Suite
201202203204205206207208209210
Table Of Contents
Discovery Method Low Security Medium Security High Security
Discovery initiated by an
endpoint congured for a high
security environment
Not applicable Not applicable Certicate required
Manual discovery initiated by the
MC
Certicate not required Not applicable Not applicable
Manual discovery from the client
1 Go to, https://<clientIP>.
2 Accept the certicate warning message.
3 Enter the administrator password (default password is Administrator) and login.
4 Go to, upload > certicate. Select the Cert.pemle from the default path and click Upload.
5 Go to Conguration > Management. Click the clear management state button to register the device to the new Management
Server.
6 Set the manager discovery mode to manual
7 Enter the Endpoint Bootstrap Manager URL in the following format wss://<IP Address of the WMS server>
NOTE
: If EMSDK is installed with custom port then provide Endpoint Bootstrap Manager URL in the following format
wss://<IP Address:Custom port.
8 Click Apply, and then click Continue.
9 The management status is displayed as Connected to the Endpoint server.
Adding the PCoIP endpoint vendor class to DHCP server
1 Log in to your DHCP server.
2 Right-click the DHCP server in the SERVERS pane, and select DHCP Manager.
3 Right-click the IPv4 option, and then select Dene Vendor Classes.
4 Click Add to add a new DHCP vendor class.
5 Enter the PCoIP Endpoint in the Display name eld.
6 Enter the PCoIP Endpoint in the ASCII column as the Vendor ID.
7 Click OK to save the settings.
Conguring DHCP options
1 Right-click the IPv4 option, and the select Set Predened Options.
2 Select PCoIP Endpoint as the Option class, and then click Add.
3 In the Option Type dialog box, enter the name as EBM URI, data type as String, code as 10, and description as Endpoint Bootstrap
Manager URI, and then click OK.
4 Click OK to save the settings.
5 Expand the DHCP scope to which you want to apply the options.
6 Right-click the Scope Options, and then select Congure Options.
7 Click the Advanced tab, and then select the PCoIP Endpoint vendor class.
Gestion des appareils Teradici
209