Administrator Guide

Option Description
PN Desktop Setup (Show All Application) Select this option to enable the PN desktop setup. When this
option is enabled, all the published applications are displayed on the
desktop.
Enable Multimedia Redirection (MMR) Select this option to enable the Multimedia Redirection.
Enable H.264 Decoding Support Select this option to enable the H.264 decoding support for the ICA
connections.
HDX Webcam Frame Rate Select this option to set the preferred frame rate for the HDX
Webcam.
HDX Webcam Image Width Select this option to set the width of image request from the HDX
Webcam.
HDX Webcam Image Height Select this option to set the height of image request from the HDX
Webcam.
Audio Bandwidth Limit Select this option to set the bandwidth used for audio input. From
the drop-down menu, select any one of the following options:
Low
Medium
High
Enable UDP Audio Select this option to enable the transport of audio data through
UDP.
Flash Redirection Policy Select this option to set the Flash Redirection policy. From the
drop-down menu, select either allow or deny the Flash Redirection
policy.
Transparent Key Passthrough Select this option to determine how the mapping of certain key
combinations is used when connecting to ICA sessions.
From the drop-down menu, select any one of the following options:
Local
Remote
Full Screen Only
Use Alternate Address Select this option to use an alternate IP address from the ICA
master browser to pass rewalls.
ICA Proxy Type Select this option to choose the proxy type for the ICA connection.
The default value is None.
Table 162. Conguring Citrix USB redirection settings
Option Description
Allow USB Redirection of devices plugged in before ICA Session
start
Select this option to set the ICA Desktop Appliance Mode. This
option allows the USB redirection of the devices plugged in before
the ICA session starts.
Enable USB Redirection Select this option to enable the Citrix USB redirection to all the
devices.
Managing groups and congurations 85