Administrator Guide
Option Description
Enable USB Redirection Select this option to redirect the USB drives to the remote session.
From the drop-down list, select your preferred option. If Exclude
some devices option is selected, you can exclude the following
devices from the session:
• Exclude disk devices
• Exclude audio devices
• Exclude printer devices
• Exclude video devices
Table 52. Conguring advanced settings
Option Description
Reconnect After Disconnect Select this option to reconnect the connection automatically after
the connection is disconnected.
Multi-Monitor Select this option to enable the multi-monitor support. The height
and width of the session desktop is similar to the local virtual
desktop size.
Turn Compression o Select this option to compress the le size and to reduce the time
required to download the les.
Optimize for low link speed Select the check box to optimize session settings for low link
speed.
Full Screen Mode Select this option to set the connection window in the full screen
mode.
Fast Disconnect Key Select this option to use the fast disconnect key.
NOTE: To disconnect from the sessions, press the F12
key.
Conguring USB redirection settings—ThinOS 8.5 and later versions
USB redirection (Universal Serial Bus redirection) is a technology that enables you to plug an external device into a USB port on the
endpoint and access the device from within a remote desktop or application. You can congure the USB to redirect automatically to a
particular device. Use the USB redirection settings page to force redirect the USB connected devices to the remote session.
Table 53. USB redirection settings
Option Description
Force Redirect Enter the force redirect device ID.
Force Local Enter the force local device ID.
Redirect Type From the drop-down list, select the redirection type.
NOTE: If PCoIP or Blast connection type is selected, then
do not select any value.
Interface Redirect Select this option to enable the interface redirection option.
42 Managing groups and congurations