Administrator Guide

Conguring general settings—ThinOS 8.5 and later versions
Use the General Settings page to congure the thin client general settings, such as auto power settings, local settings, mirror le server
settings, and terminal settings for ThinOS devices.
Table 12. Conguring general settings
Option Description
Auto Power The Auto Power check box species about how the system starts
when the power is rst applied to the unit.
Table 13. Conguring keyboard options
Option Description
Load the language le Select this option to install the language les on ThinOS devices.
System Language Select this option to set the language for the system. From the
drop-down list, select your preferred option.
Locale le name Select this option to select the certicate to install on the device.
From the drop-down list, select the certicates added in the le
repository.
Font le name Select this option to select the font le to install on the device.
From the drop-down list, select the font les added in the le
repository.
Table 14. Conguring mirror le server
Option Description
Mirror File Server If the FileServer is oine, this setting allows you to store a local
copy of the conguration in cache.
Table 15. Conguring terminal settings
Option Description
Terminal Name Enter the terminal name. You can also use the system variables to
automate renaming multiple devices.
Terminal Reboot If this setting is enabled, the system is forced to restart after the
terminal name is changed. Restart the system to view the changes.
Inactive Select this option to restart or shut down the system depending on
the option you have selected from the Action after All Sessions
Exit drop-down list in the Visual Experience policy setting for the
ThinOS devices. Enter the time value in minutes. The range of
inactive time is 0–480 seconds.
No Session Timer Select this option to restart or shut down the system depending on
the option you have selected from the Action after All Sessions
Exit drop-down list in the Visual Experience policy setting for the
ThinOS devices. Enter the time value in minutes. The range of
inactive time is 0–480.
NOTE: This setting only applies if the Inactive value is set
to 0.
26 Managing groups and congurations