Administrator Guide

3 To add an application to the inventory, do the following:
a Place the thin client application les in the <repo-dir>\repository\thinClientApps folder.
Wyse Management Suite Repository sends metadata for all the les to the Wyse Management Suite server periodically.
b Place the Windows Embedded Standard imaging les in the <repo-dir>\repository\osImages\Zippedfolder.
The image is automatically extracted and placed in a valid folder. The image is listed in the Windows Embedded Standard image
inventory.
Deploying applications to thin clients
The standard application policy allows you to install a single application package and requires reboot before and after installing each
application. Using the advanced application policy, you can install multiple application packages with only two reboots. The advanced
application policy also supports execution of pre and post installation scripts that may be needed to install a particular application. For more
information, see
Appendix B.
Creating and deploying standard application policy to
thin clients
To deploy a standard application policy to thin clients, do the following:
1 In the local repository, go to thinClientApps, and copy the application to the folder.
2 Ensure that the application is registered by navigating to the Apps & Data tab and selecting Thin Client under App Inventory.
NOTE
: The App Inventory interface takes approximately two minutes to populate any recently added programs.
3 Click Apps & Data.
Apps & Data page is displayed.
4 In App Policies, click Thin Client.
5 Click Add Policy.
Add Standard App Policy window is displayed.
6 Enter the Policy Name.
7 From the drop-down list, select the Group.
8 From the drop-down list, select the Task.
9 From the drop-down list, select the OS Type.
10 From the drop-down list, select the Application.
11 To deploy this policy to a specic operating system or a platform, select either OS Subtype Filter or Platform Filter.
12 Timeout displays a message on the client which gives you time to save your work before the installation begins. Specify the number of
minutes the message dialog box should be displayed on the client.
13 To allow delay in execution of the policy, select the Allow delay of policy execution check box. If this option is selected, the following
drop-down menus are enabled:
• From the Max Hours per Delay drop-down list, select the maximum hours (1–24 hours) you can delay the policy execution.
• From the Max delays drop-down list, select the number of times (1–3) you can delay execution of the policy.
14 If you want to automatically apply this policy to a registered device which belongs to a selected group or is moved to a selected group,
select Apply the policy to new devices from the Apply Policy Automatically drop-down list.
NOTE
: If you select Apply the policy to devices on check in, the policy is automatically applied to the device at check-
in.
15 To allow a delay in execution of the policy, select the Allow delay of policy execution check box. If this option is selected, the
following drop-down menus are enabled:
• From the Max Hours per Delay drop-down list, select the maximum hours (1–24 hours) you can delay execution of the policy.
140
Apps and data