Administrator Guide

Resetting to factory default settings
To reset your ThinOS-based devices to factory default settings, do the following:
1 Click Devices.
The Device page is displayed.
2 Apply the lters to nd the preferred device.
3 Select the check box of the device.
4 From the More Actions drop-down menu, click Factory Reset.
An Alert window is displayed.
5 Enter the reason for the client reset.
6 Click Send Command.
Changing a group assignment
To change a group assignment, do the following:
1 Click Devices.
The Device page is displayed.
2 Apply the lters to nd the preferred device.
3 Select the check box of the device.
4 From the More Actions drop-down menu, click Change Group.
The Change Group Assignment window is displayed.
5 From the drop-down menu, select a new group for the device
6 Click Save.
Sending messages to devices
To send messages to devices, do the following:
1 Click Devices.
The Devices page is displayed.
2 Apply the lters to nd the preferred device.
3 Select the check box of the device.
4 From the More Actions drop-down menu, click Send Message.
The Send Message window is displayed.
5 Enter the message.
6 Click Send.
Activating the devices
If a device is turned o or in the sleep mode, and you want to activate the device, then do the following:
1 Click Devices.
The Device page is displayed.
2 Apply the lters to nd the preferred device.
3 Select the check box of the device.
4 From the More Actions drop-down menu, click Wake On LAN.
An Alert window is displayed.
5 Click Send Command.
130
Managing devices