Administrator Guide

Option Description
Domain Name Select this option to dene a domain name for the connection.
Auto Reconnect Select this option to enable the connection to automatically
reconnect, if the connection is dropped.
Table 240. Conguring RD gateway settings
Option Description
Use RD Gateway settings Select this option to congure the settings for RD gateway. After
you enable the option, enter the RD Server name for the gateway.
Specify the credentials to validate the connection with the RD
Gateway.
From the RD Gateway Logon Method drop-down menu, select any
one of the following:
• Ask for password NTLM
• Smartcard
• Allow me to choose later
From the RD Gateway Usage Method drop-down menu, select
any of the following ways to use a remote desktop server:
• Do not use RD Gateway server—All IP addresses
• Use RD Gateway server settings
• Use RD Gateway server settings for Non-Local IP addresses
only
• Use default settings
• Local IP addresses only
Remote Desktop Gateway KDC Proxy Select this option to congure the settings for KDC proxy. After you
enable the option, enter the KDC Proxy Name name for the sever.
Table 241. Conguring display settings
Option Description
Fullscreen Select this option to set the connection window in the full screen
mode.
After the full screen mode is enabled, from the drop-down menu,
select the window size.
Display Connection Bar Select this option to display the connection bar in the full screen
mode.
MultiMonitor Support Select this option to enable the multi-monitor support.
Screen Color Depth (in bits) Select this option to dene the screen color depth of the
connection.
• RDP 15–Bit High Color
• RDP 16–Bit High Color
• RDP 24–Bit True Color
• RDP 32–Bit Highest Quality
118 Managing groups and congurations