Administrator Guide

Saving the current filter
About this task
After selecting your required filter options, you can save the filters as a group. To save the current filter, do the following:
Steps
1. Enter the Name of the filter.
2. Provide a description for the filter in the Description box.
3. Select the check box to set the current filter as the default option.
4. Click Save Filter.
Querying the device status
About this task
To send a command to update the device information and status in the system, do the following:
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. Click Query.
An Alert window is displayed.
5. Click Send Command to send the query command.
Locking the devices
About this task
To lock the registered device, do the following:
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. Click Lock.
An Alert window is displayed.
5. Click Send Command to send the lock command.
Restarting the devices
About this task
To restart the registered device, do the following:
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
Managing devices
139