Administrator Guide

Table 11. Configuring broker server (continued)
Option Description
Citrix custom store name Enter the citrix store name for the citrix StoreFront
connection. This option is applicable only for Citrix.
Sessions to connect automatically Select this option to automatically connect to the session.
NOTE: The name of the desktop or application is case
sensitive. Use a semicolon to separate the multiple
sessions which must be initialized automatically.
Reconnect At Logon From the drop-down menu, select your preferred option. You
can reconnect to both disconnected and active sessions. This
option is applicable only for Citrix.
Security Mode Select this option to set a security mode. From the drop-down
menu, select your preferred option. This option is applicable
only for VMware
Protocol Select this option to choose a protocol. From the drop-down
menu, select your preferred option. This option is applicable
only for VMware.
Enable vWorkspace Gateway Select this option to enable vWorkspace gateway
functionality. This option is applicable only for vWorkspace.
ThinOS—Advanced mode
Use this page to configure the advanced policy settings for the ThinOS devices. To configure the advanced policy settings, do
the following:
1. Select Advanced Configuration as the mode of configuration.
2. The following are the available policy settings on the ThinOS page.
Figure 4. ThinOS—Advanced mode
● Device Configuration
● Advanced Device Configuration
● Remote Connection (Legacy)
● Remote Connection (8.5+)
● Printers (8.5+)
● Network Settings (8.5+)
3. Click Save & Publish to save your changes.
Managing groups and configurations
25