Administrator Guide

3. Select the check box of the device.
4. Click Restart.
An Alert window is displayed.
5. Click Send Command to send the restart command.
Unregistering the devices
About this task
To unregister the registered device, do the following:
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. Click Unregister.
An Alert window is displayed.
5. Select the Force Unregistration check box.
6. Click Send Command to send the unregister command.
NOTE:
● Force unregister option can be used to remove the device when there is no communication between the server and
client. The device will be moved to unmanaged state and can be removed from the server entry.
● Unregister and Force unregister actions can be performed by WES WDA UI also.
Resetting to factory default settings
About this task
To reset your ThinOS-based devices to factory default settings, do the following:
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. From the More Actions drop-down menu, click Factory Reset.
An Alert window is displayed.
5. Enter the reason for the client reset.
6. Click Send Command.
Changing a group assignment
About this task
To change a group assignment, do the following:
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
Managing devices
139