Administrator Guide

Configuring power settings
Use the Power page to configure the power settings.
Table 225. Configure power settings
Option Description
OSD Screen Saver Timeout This is the period of inactivity in the device. You can enter the
time in seconds. After the time is entered, the device sets the
attached displays to low power mode. The range is 10–9999.
Enter the time as 0 to disable this option.
NOTE: This feature is applicable only when the device is
not in the session.
Display Suspend Timeout This is the period of inactivity in the device. You can enter the
time in seconds. After the time is entered, the device sets the
attached displays to low power mode. The range is 10–14400.
Enter the time as 0 to disable this option.
NOTE: This feature applicable only when the device is in
the session.
Configuring security settings
Use the Security page to configure the security settings.
Table 226. Upload certificate
Option Description
Certificates Select the required check box to upload the certificate. Clear
the check box to delete an uploaded certificate. The list of
certificates uploaded on the File Repository Inventory page
is displayed. The certificates are deleted after you restart the
device. You can only upload .pem files.
Table 227. USB device authorization
Option Description
Authorized/Unauthorized Devices based on Class From the Status, and the Device Class drop-down list,
select your preferred option. You can authorize or unauthorize
a USB device based on class. Click the Add Class option to
add more classes. Click the – icon to remove a class.
Table 228. Advanced configuration
Option Description
Enable Administrative Web Interface Select the check box to enable the management console
interface. If enabled, the PCoIP management console cannot
access or manage the Tera2 PCoIP zero client.
Enable Wake-On-LAN Select the check box to enable the thin client to power up
from the off state. You can trigger a thin client to power up
from the off state by using a LAN signal.
Enable Power On After Power Loss Select the check box to enable the thin client to power up
from the off state when the power is supplied.
Remember Username Select the check box to populate the last entered user name
automatically.
Security Settings From the drop-down list, select the preferred option. The
available options are:
110 Managing groups and configurations