Administrator Guide

Table 220. Configure reboot schedule settings
Option Description
● Reboot immediately—The system restarts immediately.
● Reboot later—Select the Reboot Hour and Reboot
Minute to set the system restart time.
● Do not reboot—The system does not restart.
Editing Teradici policy settings
About this task
To edit the Teradici policy settings, do the following:
Steps
1. Click Groups & Configs.
The Groups & Configs page is displayed.
2. Click the Edit Policies drop-down menu.
3. Click Teradici.
The Teradici page is displayed. The Teradici thin client policy settings contain the following options:
● Timezone
● Language
● Company Logo
● Video
● Power
● Security
● Firmware upgrade
● Remote Connection
4. Click Save and Publish.
Configuring time zone settings
Use the Time zone page to configure the time zone settings for Teradici thin client.
Table 221. Configure time zone settings
Option Description
Enable NTP Select the check box to enable the Network Time Protocol
(NTP) feature.
NTP Server Select this option to enter the NTP hostname. The hostnames
must be either IP addresses or FQDNs.
Query Interval Enter the query response interval in minutes, hours, days, or
weeks. Query response interval is the maximum amount of
time that can pass between the time the router sends a query
and receives a response from the host.
Time zone From the drop-down list, select the time zone of the system.
Enable DayLight Savings Select the check box to enable the Daylight Saving Time
(DST) feature.
Configuring language settings
Use the Language page to configure the language settings.
108
Managing groups and configurations