Administrator Guide

Steps
1. Click the Rules tab.
2. Select the Unmanaged Device Auto Assignment option.
3. Select the rule which you want to move and then move it to the top order.
4. Click Save Rule Order.
NOTE: You cannot change the IPV6 Prefix rule order.
Add a rule for alert notification
Steps
1. Click the Rules tab.
2. Select the Alert Notification option.
3. Click Add Rule.
An Add Rule window is displayed.
4. From the Rule drop-down list, select a rule.
5. Enter the Description.
6. From the Group drop-down list, select the preferred option.
7. From the drop-down menu, select a target device to apply Notification Target and the time duration to apply Notification
Frequency.
8. Click Save.
Edit an alert notification rule
Steps
1. Click the Rules tab.
2. Select the Alert Notification option.
3. Click Edit Rule.
An Edit Rule window is displayed.
4. From the Rule drop-down list, select a rule.
5. Enter the Description.
6. From the Groups drop-down list, select a group.
7. From the drop-down list, select a target device to apply Notification Target and the time duration to apply Notification
Frequency.
8. Click Save.
Create rule to auto-unregister a device
From Wyse Management Suite 3.2, you can create a rule to auto-unregister a device if it does not check-in with Wyse
Management Suite for a period of time.
Steps
1. Click the Rules tab.
2. Click the Failed Check-In option.
Managing rules
93