Administrator Guide

4. From the More Actions drop-down menu, click Pull Configuration UI Package.
An Alert window is displayed.
5. Click Send Command.
Reset your Dell Hybrid Client to factory settings
You can send a command to reset your Dell Hybrid Client to factory settings.
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. From the More Actions drop-down menu, click Factory Reset.
An Alert window is displayed.
5. Enter the reason for the Dell Hybrid Client reset.
6. Click Send Command.
Bulk group change of devices
From Wyse Management Suite 3.2, you can change the group of several devices using the serial number, MAC address, or
Hostname. This option is applicable only for Wyse Management Suite with a pro license.
Prerequisites
Create a CSV file with the serial number, MAC address, or Hostname of the devices.
Steps
1. Click Devices.
The Devices page is displayed.
2. From the More Actions drop-down list, select Bulk Change Group.
The Bulk Change Group Assignment window is displayed.
3. From the Select the property to filter Device drop-down list, select a property to filter the devices to change to a new
group based on the selected property.
4. To select the CSV file, click Browse and go to the location where the CSV file is located.
5. From the Select a new group for these devices drop-down list, select the new group for the devices.
6. Click Save.
NOTE: You can change the group of a maximum of 100 devices at a time.
74 Managing devices