Administrator Guide

3. Select the check box of the device.
4. From the More Actions drop-down menu, click Send Message.
The Send Message window is displayed.
5. Enter the message.
6. Click Send.
Activating the devices
About this task
If a device is turned off or in the sleep mode, and you want to activate the device, then do the following:
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. From the More Actions drop-down menu, click Wake On LAN.
An Alert window is displayed.
5. Click Send Command.
Viewing device details
About this task
To view the device details, do the following:
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device. For more information, see Searching a device using filters.
The preferred device list is displayed.
3. Click any one of the displayed devices.
The Device Details page is displayed.
Managing device summary
About this task
To view and manage information on the Notes, Group Assignment, Alerts, and Device Configuration, do the following:
Steps
1. Click Devices.
2. On the Device Details page, click Summary tab.
The device summary is displayed.
3. In the right pane, click Add note.
An Add Note window is displayed.
4. Type the message in the provided field and click Save.
5. In the right pane, click Change Group Assignment.
The Change Group Assignment window is displayed.
6. From the drop-down menu, select a new group for the device.
7. Click Save.
124
Managing devices