Administrator Guide

Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. Click Unregister.
An Alert window is displayed.
5. Select the Force Unregistration check box.
6. Click Send Command to send the unregister command.
Resetting to factory default settings
About this task
To reset your ThinOS-based devices to factory default settings, do the following:
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. From the More Actions drop-down menu, click Factory Reset.
An Alert window is displayed.
5. Enter the reason for the client reset.
6. Click Send Command.
Changing a group assignment
About this task
To change a group assignment, do the following:
Steps
1. Click Devices.
The Device page is displayed.
2. Apply the filters to find the preferred device.
3. Select the check box of the device.
4. From the More Actions drop-down menu, click Change Group.
The Change Group Assignment window is displayed.
5. From the drop-down menu, select a new group for the device
6. Click Save.
Sending messages to devices
About this task
To send messages to devices, do the following:
Steps
1. Click Devices.
The Devices page is displayed.
2. Apply the filters to find the preferred device.
Managing devices
123