Administrator Guide

Option Description
Ping before connect You can enable the ping option to verify that the host is reachable.
Enable middle button paste login You can enable paste option during login.
Compression You can enable or disable compression during a session.
Configuring remote connection settings—VMware
Use this page to create a VMware View broker connection.
Table 196. Configuring remote connection VMware
Option Description
Connection Name Select this option to enter a name to identify the connection.
Auto Launch Connection On Logon Select this option to automatically launch the connection after you
log in.
VMWare Server Address Enter the hostname or the IP address of the VMware View server.
VMWare Server Port Number Enter the port number of the host.
Use Secure Connection (SSL) Select this option to use the SSL connection.
Protocol Select this option to set PCOIP or RDP as protocol.
Enable NLA Select this option to enable Network Level Authentication. When
the RDP option is set as protocol, this option is displayed.
Username Enter the user name
Password Enter the password.
Domain Name Enter the domain name.
Interactive Mode Select this option to enable the User Interactive mode.
Lock the Server URL / Host field Select this option to lock the server URL.
Security Mode Select this option to set the security mode. From the drop-down
menu, select any one of the following options:
• Never connect to untrusted servers
• Warn before connecting to untrusted servers
• Do not verify server identity certificates.
Fullscreen Mode Select this option to view the remote session in the fullscreen
mode.
Window Size Select this option to set a window size. From the drop-down menu,
select any one of the following options:
• Use all monitors
• Full Screen
• Large Screen
• Small Screen
• 1024 x 768
• 800 x 600
• 640 x 480
94 Managing groups and configurations