Manualshelf

Administrator Guide

ManualsBrandsDell ManualsConverged InfrastructureWyse Management Suite
81828384858687888990
Table 172. Configuring BIOS Admin Password
Option Description
Admin Password Select this check box to set the administrator password.
Table 173. Configuring auto-on settings
Option Description
Auto On Time From the drop-down list, set the time of the day you want the
system to turn on automatically.
Table 174. Reboot schedule settings
Option Description
Reboot Option Some BIOS settings require the system to restart. From the drop-
down list, select one of the following options:
• Reboot immediately—The system restarts immediately.
• Reboot later—Select the Reboot Hour and Reboot Minute
to set the system restart time.
• Do not reboot—The system does not restarts.
Configuring BIOS settings for Wyse 5470 Thin Client with
Windows 10 IoT Enterprise
Use the BIOS settings page to configure the BIOS settings for Wyse 5470 Thin Client with Windows 10 IoT Enterprise.
Table 175. System configuration
Option Description
Enable Audio Select this check box to enable the audio device.
Enable Microphone Select this check box to enable the microphone.
Enable Internal Speaker Select this check box to enable the internal speaker.
SATA-0 Select this check box to enable SATA-0.
Integrated NIC From the drop-down list, select the option to control the on-board
LAN controller. The available options are:
• Disabled—The internal LAN is off and not visible to the
operating system if it does not have an IP address.
• Enabled—The internal LAN is enabled.
• Enabled w/PXE—The internal LAN is enabled with PXE boot.
USB PowerShare Select this check box to enable USB power sharing.
Table 176. USB Configuration
Option Description
External USB Ports Select this check box to enable the device attached to this port.
The device is also made available to the operating system. If a USB
port is disabled, operating system cannot detect any device
attached to the port.
Table 177. Security
Option Description
Admin Setup Lockout Select this check box to prevent users from entering Setup when
the admin password is set.
84 Managing groups and configurations