Administrator Guide

Table 161. Configuring power management settings
Option Description
Wake On LAN From the drop-down list, select any option to allow the thin client
to power up from the OFF state. You can trigger a thin client to
power up from the OFF state by using a LAN signal.
AC Recovery From the drop-down list, select any option to specify how the
system operates when the AC power is restored.
Table 162. Configuring wireless settings
Option Description
WLAN/WiGig Select this check box to enable the internal wireless devices.
Bluetooth Select this check box to enable Bluetooth devices.
Table 163. Configuring auto-on settings
Option Description
Auto On Time From the drop-down list, set the time of the day you want the
system to turn on automatically.
Table 164. Reboot schedule settings
Option Description
Reboot Option Some BIOS settings require the system to restart. From the drop-
down list, select one of the following options:
• Reboot immediately—The system restarts immediately.
• Reboot later—Select the Reboot Hour and Reboot Minute
to set the system restart time.
• Do not reboot—The system does not restarts.
Configuring BIOS settings for Wyse 5470 All-in-One thin
client with Windows 10 IoT Enterprise
Use the BIOS settings page to configure the BIOS settings for Wyse 5470 All-in-One thin client with Windows 10 IoT Enterprise.
Table 165. System configuration
Option Description
Enable Audio Select this check box to enable the audio device.
Enable Microphone Select this check box to enable the microphone.
Enable Internal Speaker Select this check box to enable the internal speaker.
On Screen Buttons Select this check box to enable the on-screen buttons.
SATA-0 Select this check box to enable SATA-0.
Integrated NIC From the drop-down list, select the option to control the on-board
LAN controller. The available options are:
• Disabled—The internal LAN is off and not visible to the
operating system if it does not have an IP address.
• Enabled—The internal LAN is enabled.
• Enabled w/PXE—The internal LAN is enabled with PXE boot.
82 Managing groups and configurations