Administrator Guide

Option Description
EnableLPD This option is applicable only for local printer and SMB printer.
Select the check box to enable the LPD service.
Configuring WLAN global settings
Use the WLAN Global Settings page to configure WLAN global settings for ThinOS 8.5 and later version devices.
Table 92. Configuring WLAN global settings
Option Description
Roam Sensitivity
Select this option to choose the sensitivity level of wireless
roaming.
Disable Band From the drop-down menu, select the preferred option.
The Disable Band configuration is used to disable 2.4G or 5G
802.11 band. The default value is Do not disable any band.
Prefer Band From the drop-down menu, select the preferred option.
The Prefer Band configuration is used to set the priority of
wireless connection band, and to select the 2.4G or 5G access
point to connect. The default value is Do not prefer any band.
DisableN Select the check box to disable the 802.11n mode.
Disable WLAN Select this option to disable the wireless functionality. From the
drop-down menu, select the preferred option.
If you select the EnetUp option from the drop-down menu, when
the ethernet is up and running, the wireless is disabled.
Configuring WLAN connections
Use the WLAN Connections page to configure the thin client WLAN connections for ThinOS 8.5 and later version devices.
Table 93. Configuring authentication settings
Option Description
Security Type Select this option to specify the authentication method. From the
drop-down menu, select any one of the following options:
• Open
• Open(WEP)
• SharedKey
• WPA-Personal
• WPA-Enterprise
• WPA2-Personal
• WPA2-Enterprise
Encryption This option is applicable only for Open(WEP), SharedKey, WPA-
Personal, and WPA-Enterprise. From the drop-down menu, select
your preferred option.
Web Key 1,2,3, and 4 This option is applicable only for Open(WEP) and SharedKey. From
the drop-down menu, select your preferred option.
WPA Key This option is applicable only for WPA-Personal and WPA2-
Personal. Enter the WPA key in the provided field.
Network Type This option is applicable only for WPA-Personal, WPA-Enterprise,
WPA2-Personal, and WPA2-Enterprise. From the drop-down
menu, select your preferred option.
56 Managing groups and configurations