Administrator Guide

Option Description
Default color depth for the connections Select this option to define the screen color depth of the
connection.
Table 82. Configuring advanced settings
Option Description
Connection Display Select this option to set the screen resolution on the remote
desktop.
Turn Compression off
Select this option to compress the files and to reduce the time
required to download the files.
Auto-Detect Network Select this option to automatically detect the terminal server
gateway.
Mouse Queue timer
To set the mouse queue timer in an ICA or RDP session, enter a
number from 0 to 99.
Session Window Behavior Select this option to define whether the remote connection should
be launched in a full-screen mode. Select either Full Screen or
Window mode based on your preference.
NOTE: Zero launchpad mode only supports full screen
sessions. Window mode starts on a single screen while
the full screen session spans both monitors.
Table 83. Configuring terminal gateway settings
Option Description
Use Terminal Server Gateway Select this option to specify the Windows terminal server login
details. If enabled, enter the following details:
• RD host name or IP address
• RD user name
• RD password
• RD domain name
Configuring direct ICA connection settings
Use the Direct ICA Connection settings page to configure the ICA connections which can be accessed on the ThinOS 8.5 and later
version devises.
Table 84. Configuring basic settings
Option Description
Connection Name Enter the name of the connection with a maximum of 38
characters.
User Name Enter the user name for the application login.
Password Enter the password for the application login.
NOTE: The password is not encrypted. Dell recommends
that you do not specify the password. You are prompted
to enter the password when the connection is created.
Domain Name Enter the domain name for Windows network with a maximum of
19 characters.
Auto Start Select this option to restart the connection automatically.
Reconnect After Disconnect Select this option to reconnect the connection automatically after
the connection is disconnected.
Managing groups and configurations 53